AAS Ascent X1 Quick Start Manual
Also see for Ascent X1: Installation and operating manualQuick start guide
    |
1 Carefully unpack box.1 of 4We recommend mounting Ascent X1 on astandard gooseneck pedestal.If using alternate mounting, the optionalAscent 10' Cable Extension (p/n 16-X-EXT)must be purchased. Follow the instructionsincluded with the extension before moving on.Failure to do so may result in no signal!IMPORTANT!rCopyright © Security Brands, Inc. QSG-16X1-EN Rev. D (12/2015)START HERE2 Unlock and open front panel of unitfor access to internal components.QUICK START GUIDEWhat’s what?All the important componentslabeled for you.Camera kit mounting locationCamera kit sold separately.Terminal blockFor wiring to gate operatoror door opernerAntenna cableReset button and terminalsfor performing hard resetSIM cardIf you have your own SIM card, see page 4and follow the instructions entitledInstalling Custom SIM Card.Speaker connectorSpeaker can be disconnected temporarilyif unit is intermittently beeping. This is usuallydue to a SIM card that is not yet activated.WARNING!AUTOMATIC GATES CAN CAUSESERIOUS INJURY OR DEATH!ALWAYS CHECK that the GATE PATH ISCLEAR BEFORE OPERATING!Reversing or other safety devices shouldALWAYS BE USED!Continued on next page...Unit shown with front panel fully open.Internal wiring not shown for clarity.IMPORTANT!rAscent X1 WILL NOT WORK until theactivation process has been completed!Follow the Activation Guide or callSummit Control at (844) 259-8265 toactivate your unit. |
Related manuals for AAS Ascent X1
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine