AAVIK U-150 User Manual
            | |
Front panel functionsSOURCE INDICATORDuring normal operation the left side display shows the selected source. The lineinputs are shown as L-1, L-2 and L-3. The phono input (if the phono module isfitted), is shown as P-1. The digital inputs (if the DAC module is fitted), are shownas D-1 to D-5.It is possible to change the source with the rotating knob (17), when navigationmode is activated. When changing settings (see “MUTE, GAIN, CARTRIDGELOADING AND BALANCE SETTINGS” and “MENU FUNCTIONS”), the sourceindicator display will show the current item being changed.When playing digital sources, the line separating D and the number, will change toa number of dots depending on the format being played. Two dots with a space inbetween (Fig. a) means DSD (available on the USB input only). 1-4 dots withoutspaces indicate different PCM formats (Fig. b, c, d, e).MUTE, GAIN, CARTRIDGE LOADING AND BALANCE SETTINGSThe mute button has multiple functions. When you press this button briefly, it willmute the speaker outputs of the amplifier, and also the pre outs with the standardconfiguration (see “MENU FUNCTIONS” page 7). A minus and a speaker symbolwill be shown on the right side display, indicating that the outputs of the amplifierare muted.The other functions of the mute button, allows you to set the gain of the input, toset the cartridge loading for the phono stage, and to adjust the left/right balance.These settings can also be changed using the remote control.See “MENU FUNCTIONS”.INDIVIDUAL GAIN SETTINGSPress and hold the mute button (13) one second to activate the individual gain set-ting mode. When activated, the left side display will show “Gain”, and the currentgain setting will be shown on the right side display (Fig. c). This mode will let youchoose between 6 gain setting for the analogue inputs and 4 settings for the digitalinputs. Turning the volume control knob (17) counter-clockwise will decrease thegain setting, whilst turning the knob clockwise increases the gain setting. Pressingthe mute button (13) briefly will deactivate the gain setting mode, and the usualdisplay will return.CARTRIDGE LOADING ADJUSTMENTWith the RIAA/phono input selected, press and hold the mute button (13) formore than three seconds to enter cartridge loading adjustment mode. The left sidedisplay will show “Rin” and the right side display will show the current setting.Use the volume control knob (17) to set the cartridge loading. Deactivate thecartridge loading adjustment by pressing the mute button briefly.NOTE!Pressing and holding the mute button (13) for less than three seconds, with theRIAA selected, will activate the gain setting mode. The button needs to be held formore than three seconds to activate the cartridge loading adjustment mode.BALANCE SETTING ADJUSTMENTThe balance between the left and right channel, can be adjusted in 1dB steps. Thebalance setting is common for all inputs. To enter the balance setting mode, pressand hold the mute button (13) for more than five seconds. The left side display will1213131313Page 9Fig. aFig. bFig. cFig. dFig. e |
Related manuals for AAVIK U-150
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine