AAton Penelope User Manual
Also see for Penelope: User guide
                                                                  | |
Contents
| 
Aaton Camera body 41System TimeTo manually set the internal camera timecode, press the «set» key then the«tech» key to open the technical menu. Select the Sys Time item andpress the «right» key to access.The display will show the camera date and time.Use the «left» or «right» key to select the following parameters: year, month,day, hour, minute, seconds.And use the «up» or «down» key to modify each one of them.Once you have set all of the date and time fields, press the «set» key to vali-date your selection.Adjusting the low-battery alert levelPenelope displays alerts when the battery voltage falls below a preset level.The thresholds set for Batt.1 and Batt.2 do not overide the cameras defaultminimum levels.Select the Bat Alert item and press the «right» key to access it. Select a val-ue between 14V and 15V for each battery by rotating the «jog» wheel, orpressing the «up» or «down» key. Press «set» to validate your selection.The alert level for Aaton Lithium-Ion onboard batteries must be set at 14.4minimum, this will leave enough power for you to shoot a complete 400foot magazine.NOTE: firmware v1.28 and up is required to adjust the warning level to 14.4V. |
Related manuals for AAton Penelope
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine