Aaton Camera body 42Display contrast adjustmentTo adjust the LCD contrast, select the Contrast item and press the «right»key to access it. Select Main LCD Contrast by rotating the «jog» wheel, orby pressing the «up» or «down» key. Press the «right» key to access theOperator’s LCD and follow the same procedure. Press the «set» key to vali-date your selection.External SyncTo remove the roll bar while filming a video monitor, the film camera must besynced to its vertical scanning rate, depending on the sensor used to measu-re this rate you must set the Ext Sync item to either 1 or 2 ppvf, see p.37.Footage ModeYou can display either the remaining or elapsed footage in the magazine.Use the «down» key to select the Ftg Mode item and press the «right» key toaccess it. Choose between Remaining or Elapsed by pressing the «left» or«right» key. Press «set» to validate your selection, then the «exit» key.
