Section 4 Setting up a project4.1 PCM600 operates on projectsA typical project in PCM600 contains a plant structure including one or several IEDobjects, where each IED object contains the engineering data created or modifiedusing the different PCM600 tools.Several projects can be created and managed by PCM600, but only one project can beactive at a time.4.2 Installing Connectivity packagesA Connectivity package contains the complete description of the IED data signals,parameters and protocol addresses for a certain IED type and version. Several types ofIEDs can be managed in one PCM600 project, thus the corresponding Connectivitypackage has to be installed on the PC. Connectivity Packages and ConnectivityPackage Updates are managed in the Update Manager.PCM600 must be installed before the connectivity packages can beinstalled.A Connectivity package for a specific IED type and version is divided in two parts.The IED connectivity package base module is common for all 650 series IEDs. TheIED specific module is separate for each type of IED.Installing IED Connectivity packageThe Connectivity package is available on the CD that was distributed along with theIED.Procedure1. Close PCM600 before running the IED connectivity package installation.2. Install the 650 series Connectivity package base.3. Select and install the IED modules as required.4. Install the documentation.1MRK 511 284-UEN A Section 4Setting up a project650 series 23Engineering manual
