ProgrammingABB Control - AC 31 Page 5-391SBC 260400 R1001-b 06.995.7.3. TP: monostable (constant)This block enables the activation of an output during a fixed time as from the moment when arising edge appears on the input. A new rising edge will not be taken into account if it appearson the input before the timer time has been completed.TPINPTQET%I62.00%KD001.00%O62.00%MD000.00QPTINPT5.7.4. TIME_W:The function TIME_W can be used to display elapse time on the display extension XTC 085.7.5. W_TIME:The function W_TIME is needed when the time value has to be modified during program (i.e.Control panel, supervisor, set point validation…)TIME_WTIMEHMNSECMS%OW63.00%OW63.01%OW63.02%OW63.03%MD000.00W_TIMEHMNSECMS TIME%OW63.00%OW63.01%OW63.02%OW63.03 %MD000.00TONINPTQET%MD000.00%I62.00 %O62.00%MD000.01
