ABB ACQ580-01 Quick Installation And Start-up Manual

Also see for ACQ580-01 Series: Manual User manual Installation guide Installation supplement Supplement

ABB ACQ580-01 Quick Installation And Start-up Manual Manual pdf 15 page image

EN – R1…R4 Quick installation guide 15R1-R4R5R6-R9ENDEESFIFRRUSVZHEN – R1…R4 Quick installation guideThis guide briefly describes how to install the drive for IEC use. For completeinformation on installation, see ACQ580-01 (0.75 to 250 kW, 1.0 to 350 hp) hardwaremanual (3AXD50000044862 [English]). For start-up instructions, see chapter EN –Quick start-up guide on page 43.To read a manual, go to www.abb.com/drives/documents and search for thedocument number.Obey the safety instructionsCheck if capacitors need to be reformedThe capacitors must be reformed if the drive has not been powered (either in storageor unused) for a year or more.You can determine the manufacturing time from the serial number, which you find onthe type designation label attached to the drive. The serial number is of formatMYYWWRXXXX. YY and WW tell the manufacturing year and week as follows:YY: 17, 18, 19, … for 2017, 2018, 2019, …WW: 01, 02, 03, … for week 1, week 2, week 3, …For information on reforming the capacitors, see Converter module capacitorreforming instructions (3BFE64059629 [English]), available on the Internet atwww.abb.com/drives/documents.WARNING! Obey these instructions. If you ignore them, injury or death, ordamage to the equipment can occur:• If you are not a qualified electrical professional, do not do electrical installationwork.• Do not work on the drive, motor cable or motor when main power is applied. Ifthe drive is already connected to the input power, wait for 5 minutes afterdisconnecting the input power.• Do not work on the control cables when power is applied to the drive or to theexternal control circuits.• Make sure that debris from drilling, cutting and grinding does not enter the drivewhen installing.• Make sure that the floor below the drive and the wall where the drive is installedare non-flammable.