ABB ACS 601 Hardware Manual
                                                                                        | |
Contents
| 
Appendix A – ACS/ACC/ACP 601 Technical DataA-6ACx=ACS/ACC/ACPACS/ACC/ACP 601 DrivesNote: Fuses from other manufacturers can be used if they meet the ratings given in the table. Onlyultra rapid fuses guarantee the proper protection for the rectifier semiconductors. The fusesrecommended in the table are UL recognized.Example For ACS 601-0120-3, the recommended fuses for the input bridge protection are 400 Aultrarapid fuses.The valuesI 1N andI 1hd for ACS 601-0120-3 are 175 A and 145 A respectively. 1.1 ·175 A = 192.5 A and 1.5 · 145 A = 217 A. Normal fuses with nominal currents higherthan 192.5 A or 217 A can be used to protect the input cable; thus, 200 A or 250 Afuses are selected depending on the use (normal or heavy-duty, respectively).Cable Entries Power and motor cable terminal sizes and tightening torques for theACS/ACC/ACP 601 with cable diameters accepted by the rubberglands are given below. All power wiring must be rated for 60 °Cminimum.1)The terminals are 10mm (13/32”) bolts for attaching ring lugs (lugs not furnished).2)IEC version. Range of cable diameters accepted by gland plate holes. For USA version conduit plate drawings, see pages B-9 and B-10.ACx 601-0040-6 50 770 660 Bussmann 170M1564 000 170M1364 000/80ACx 601-0050-6 63 1450 660 Bussmann 170M1565 000 170M1365 000/80ACx 601-0060-6 100 4650 660 Bussmann 170M1567 000 170M1367 000/80ACx 601-0070-6 100 4650 660 Bussmann 170M1567 000 170M1367 000/80ACx 601-0100-6 125 8500 660 Bussmann 170M1568 000 170M1368 000/80ACx 601-0120-6 200 28000 660 Bussmann 170M1570 000 170M1370 000/80ACx 600 TypeU1,V1,W1 / U2,V2,W2 Ground (PE)MaximumWIre SizeCable Ømm2)TighteningTorque MaximumWIre SizeCable ØmmACx 601-0005-3/0006-56mm2#10 AWG14...201.5...1.8 Nm13-18 lb.-in.6mm2#10 AWG10...14ACx 601-0006-3/0009-5 14...20 10...14ACx 601-0009-3/0011-5 14...20 10...14ACx 601-0009-6/0011-610mm2#8 AWG14...2010mm2#8 AWG10...14ACx 601-0011-3/0016-5/0016-6 14...20 10...14ACx 601-0016-3/0020-5/0020-6 14...20 10...14ACx 601-0020-3/0025-5/0025-6 16mm2#6 AWG14...20 16mm2#6 AWG10...14ACx 601-0025-3/0030-5/0030-6 14...20 10...14ACx 601-0030-3/0040-5/0040-6 Cu 35mm2#2 AWGAl 50mm2#1 AWG20...268Nm5.9 lb.-ft.35mm2#2 AWG10...14ACx 601-0040-3/0050-5/0050-6 20...26 10...14ACx 601-0050-3/0060-5 20...26 10...14ACx 601-0060-3/0070-5/0060-6 70mm2#00 AWG26...35 10...14ACx 601-0070-3/0100-5/0070-6 26...35 10...14ACx 601-0100-3/0120-5/0100-6 1) 30 Nm22 lb.-ft.70mm2#00 AWGACx 601-0120-3/0140-5/0120-6ACx 601 TypeFusesA A 2s V Manufacturer TypeDIN 43620 Size TypeDIN 43653 Size |
Related manuals for ABB ACC 601
manualsdatabase
Your AI-powered manual search engine