Appendix A – ACS/ACC/ACP 601 Technical DataA-14ACx=ACS/ACC/ACPACS/ACC/ACP 601 DrivesExternal ControlConnectionsData of the external control connection boards of the ACS 600 productfamily are given below.ACS/ACC/ACP 600NIOC-01 BoardACP 600NIOCP-01 BoardAnalog InputsThe advantage of thedifferential analoginput is that theground potential ofthe device ortransmitter sendingan analog signal candiffer up to ± 15 Vfrom the groundpotential of theACx 600 chassiswithout disturbing thesignal. Differentialinput also efficientlyattenuates commonmode disturbancescoupled to controlcables.ACS 600: Two Programmable DifferentialCurrent Inputs: 0 (4) to 20 mA,Rin = 100 ΩACC 600: Two Differential Current Inputs:0 to 20 mA,R in = 100 ΩACP 600: One Programmable DifferentialCurrent Input: 0 to 20 mA,Rin = 100 ΩACS/ACP 600: One ProgrammableDifferential Voltage Input: ACS 600: 0 (2) to10 V,R in > 200 kΩ; ACP 600: 0 to 10 V,R in >200 kΩACC 600: One Differential Voltage Input: 0to 10 V,R in > 200 kΩCommon Mode Voltage: ± 15 VDC, max.Common Mode Rejection Ratio: > 60 dB at50 HzResolution: 0.1 % (10 bit)Inaccuracy: ± 0.5 % (Full Scale Range) at25 °C (77 °F). Temperature Coefficient:± 100 ppm/°C (56 ppm/ °F), max.Input Updating Time: 12 ms (ACS 600),44 ms (ACC 600), 1 ms (ACP 600)Two Bipolar Differential Voltage Inputs:± 10 V,R in = 20 kΩCommon Mode Voltage: ± 20 VDC, max.Common Mode Rejection Ratio: > 60 dB at50 HzResolution: 0.02 % (12 bit)Accuracy: 11 bitInaccuracy: ± 0.1 % (Full Scale Range) at25 °C (77 °F). Temperature Coefficient:± 100 ppm/°C (56 ppm/ °F), max.Input Updating Time: 1 msConstant VoltageOutputVoltage: 10 VDC ± 0.5 % (Full Scale Range) at25 °C (77 °F). Temperature Coefficient:± 100 ppm/°C (56 ppm/ °F), max.Maximum Load: 10 mAApplicable Potentiometer: 1 kΩ to 10 kΩVoltage: ± 10 VDC ± 0.5 % (Full Scale Range)at 25 °C ( °F). Temperature Coefficient:± 100 ppm/°C (56 ppm/ °F), max.Maximum Load: 10 mAApplicable Potentiometer: > 1 kΩAuxiliary PowerOutputVoltage: 24 VDC ± 10 %, Short circuit proofMaximum Current: 250 mA (130 mA withNLMD-01 option)Voltage: 24 VDC ± 10 %, Short circuit proofMaximum Current: 250 mAAnalog Outputs ACS/ACC 600: Two Programmable CurrentOutputs: 0 (4) to 20 mA,R L < 700 ΩACP 600: One Programmable CurrentOutput: 0 to 20 mA,R L < 700 ΩResolution: 0.1 % (10 bit)Inaccuracy: ± 1 % (Full Scale Range) at25 °C. Temperature Coefficient:± 200 ppm/°C (110 ppm/ °F), max.Output Updating Time: 24 or 100 ms(ACS 600), 44 ms (ACC 600), 8 ms (ACP 600)One Bipolar Programmable Voltage Output:+ 10 V,R L > 10 kΩResolution: 0.02 % (12 bit)Accuracy: 10 bitInaccuracy: ± 0.1 % (Full Scale Range) at25 °C (77 °F). Temperature Coefficient:± 200 ppm/°C (110 ppm/ °F), max.Output Updating Time: 2 ms