ABB ACS150 User Manual

Also see for ACS150 series: User manual User manual User manual Installation instructions Installation instructions

Contents

ABB ACS150 User Manual Manual pdf 74 page image

Control panel54How to select the monitored signals6. Use keys and to select the parameter value. When you havechanged the parameter value, starts flashing.ï To save the displayed parameter value, press .ï To cancel the new value and keep the original, press .Step Action Display1. You can select which signals are monitored in the Output mode and howthey are displayed with group 34 PANEL DISPLAY parameters. See page53 for detailed instructions on changing parameter values.By default, you can monitor the following three signals by browsing: 0103OUTPUT FREQ, 0104 CURRENT and 0105 TORQUE.To change the default signals, select from group 01 OPERATING DATA upto three signals to be browsed.Signal 1: Change the value of parameter 3401 SIGNAL1 PARAM to theindex of the signal parameter in group 01 OPERATING DATA (= number ofthe parameter without the leading zero), e.g. 105 means parameter 0105TORQUE. Value 0 means that no signal is displayed.Repeat for signals 2 (3408 SIGNAL2 PARAM) and 3 (3415 SIGNAL3PARAM). For example, if 3401 = 0 and 3415 = 0, browsing is disabled andonly the signal specified by 3408 appears in the display. If all threeparameters are set to 0, i.e. no signals are selected for monitoring, thepanel displays text ìn.A.î.2. Select how you want the signals to be displayed. For details, seeparameter 3404.Signal 1: parameter 3404 OUTPUT1 DSP FORMSignal 2: parameter 3411 OUTPUT2 DSP FORMSignal 3: parameter 3418 OUTPUT3 DSP FORM.3. Select the units to be displayed for the signals. This has no effect ifparameter 3404/3411/3418 is set to 9 (DIRECT). For details, seeparameter 3405.Signal 1: parameter 3405 OUTPUT1 UNITSignal 2: parameter 3412 OUTPUT2 UNITSignal 3: parameter 3419 OUTPUT3 UNIT.4. Select the scalings for the signals by specifying the minimum andmaximum display values. This has no effect if parameter 3404/3411/3418 isset to 9 (DIRECT). For details, see parameters 3406 and 3407.Signal 1: parameters 3406 OUTPUT1 MIN and 3407 OUTPUT1 MAXSignal 2: parameters 3413 OUTPUT2 MIN and 3414 OUTPUT2 MAXSignal 3: parameters 3420 OUTPUT3 MIN and 3421 OUTPUT3 MAX.Step Action DisplaySETLOCHzPAR SET FWD120.LOCPAR FWD1203LOCPAR SET FWD103LOCPAR SET FWD104LOCPAR SET FWD105LOCPAR SET FWD9LOCPAR SET FWD3LOC HzPAR SET FWD00.LOC HzPAR SET FWD5000.