Output ratingsInputratingACS880-37LC-…Heavy-duty useLight-overload useNo-overload usePHdIHdPLdILdSNPNImaxI2I1hpkWAhpkWAkVAhpkWAAA1000100011001500120014111757150014002210147013601470A-71250120012121750140015551936175016002430162015001620A-71500140014512000180018622319200018002910194018001940A-717501600163120002093260520003270218020202180A-720001800178822002294285623003590239022202390A-72000215426002765344227004320288026702880A-72300236429003034377730004740316029303160A-72500267832003437427934005370358033203580A-72800302936003888484038006080405037604050A-73400351644004512561744007050470043604700A-74000422650005424675252008480565052405650A-74500468260006010748160009390626058106260A-7￭ DefinitionsSupply voltage range.UNNominal rms input currentI1Nominal output current (available continuously with no over-loading)I2Maximum output current. Available for 10 seconds at start, then as long as allowed by drive temper-ature.ImaxTypical motor power in no-overload use. The horsepower ratings are typical NEMA motor sizes at575 V.PNApparent power in no-overload use.SNContinuous rms output current allowing 10% overload for 1 minute every 5 minutes.ILdTypical motor power in light-overload usePLdContinuous rms output current allowing 50% overload for 1 minute every 5 minutes.IHdTypical motor power in heavy-duty usePHdNote 1: The ratings apply at an ambient temperature of 40 °C (104 °F).Note 2: To achieve the rated motor power given in the table, the rated current of the drive must be higher thanor equal to the rated motor current.The DriveSize dimensioning tool available from ABB is recommended for selecting the drive, motor and gearcombination.￭ DeratingAmbient temperature deratingIn the temperature range +45…55 °C (+113…131 °F), the rated output current is deratedby 0.5 percentage points for every added 1 °C (1.8 °F). The output current can be calculatedby multiplying the current given in the rating table by the derating factor (k):146 Technical data
