MaterialsCabinet • Zinc coated steel sheet• Polyester thermosetting powder coating on visible surfaces, color RAL 7035 andRAL 9017Tin-plated copperBusbars for user powerconnectionsSee Cooling circuit materials (page 142)Liquid cooling systemInsulating materials and non-metallic items: mostly self-extinctiveFire safety of materials(IEC 60332-1)Standard package:Package• timber, polyethylene sheet (thickness 0.15 mm), stretch film (thickness 0.023 mm),PP tape, PET strap, sheet metal (steel)• for land and air transport when planned storage time is less than 2 months orwhen storage can be arranged in clean and dry conditions less than 6 months• can be used when products will not be exposed to corrosive atmosphere duringtransport or storageContainer package:• timber, VCI sheet film (PE, thickness 0.10 mm), VCI stretch film (PE, thickness0.04 mm), VCI emitter bags, PP tape, PET strap, sheet metal (steel)• for sea transport in containers• recommended for land and air transport when storage time prior to installationexceeds 6 months or storage is arranged in partially weather-protected conditionsSeaworthy package:• timber, plywood, VCI sheet film (PE, thickness 0.10 mm), VCI stretch film (PE,thickness 0.04 mm), VCI emitter bags, PP tape, PET strap, sheet metal (steel)• for sea transport with or without containerization• for long storage periods in environments where roofed and humidity-controlledstorage cannot be arrangedCabinets are fastened to the pallet with screws and braced from the top end to thepackage walls to prevent swaying inside the package. Package elements are at-tached to each other with screws.The main parts of the drive can be recycled to preserve natural resources and en-ergy. Product parts and materials should be dismantled and separated.Generally all metals, such as steel, aluminum, copper and its alloys, and preciousmetals can be recycled as material. Plastics, rubber, cardboard and other packagingmaterial can be used in energy recovery. Printed circuit boards and large electro-lytic capacitors need selective treatment according to IEC 62635 guidelines. To aidrecycling, plastic parts are marked with an appropriate identification code.Contact your local ABB distributor for further information on environmental aspectsand recycling instructions for professional recyclers. End of life treatment must followinternational and local regulations.DisposalApplicable standardsInformationStandardEuropean electrical safety requirements product standardsAdjustable speed electrical power drive systems. Part 5-1: Safety requirements –electrical, thermal and energyIEC/EN 61800-5-1:2007Semiconductor converters – General requirements and line commutated converters– Part 1-1: Specification of basic requirementsIEC 60146-1-1:2009EN 60146-1-1:2010Insulation coordination for equipment within low-voltage systems. Part 1: Principles,requirements and testsIEC/EN 60664-1:2007Degrees of protection provided by enclosures (IP code).IEC 60529:1989EN 60529:1991158 Technical data
