ABB AX416 User Manual
Also see for AnalyzeIT AX460: User guideManualUser guideUser guideUser guide
                                                                        | |
Contents
| 
425.10 Test Outputs and MaintenanceTest OutputsDisplays the output test details for the analog outputs.Note. Outputs 3 and 4 are available only if the option board is fitted and analog featuresenabled – see Section 7.3.Test Output 1 frame only is shown; the format of frames for the remaining outputs isidentical.See below.Test Output 1The theoretical output current value.Output current as a percentage of the full range current.Use the and keys to adjust the displayed theoretical output current value to give theoutput required.See Section 7.3.Test remaining outputs.MaintenanceHold OutputsEnables the relay action and analog outputs to be maintained.Auto. – Changes in relay action and analog outputs are inhibited during sensorcalibration.On – Changes in relay action and analog outputs are inhibited.Off – Changes in relay action and analog outputs are not inhibited.Note. The LEDs flash while the analyzer is in 'Hold' mode.Continued on next page.See Section 7.3.Hold Outputs set to Off or On – return to main menu.Hold Outputs set to Auto. – continued on next page.Test Outputs-----TEST/MAINTENANCE-----Test Output 14.00mA20.0%Maintenance-----Hold Outputs-----Auto.OnOffFACTORY SETTINGSTest Output 2FACTORY SETTINGSLoad/Save ConfigMaintenanceMaintenanceAutomatic Time…5 PROGRAMMING |
Related manuals for ABB AnalyzeIT AX460
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine