ABB Busch-priOn Series Technical Reference Manual

Contents

ABB Busch-priOn Series Technical Reference Manual Manual pdf 31 page image

KNX Technical Reference Manual | 0073-1-7388 | 31Pos: 22.47 /Produkthandbuch - DIN-A4/Überschriften/2. Ebene/M - O/Mediensteuerung Video-Player @ 9\mod_1269501501586_15.doc @ 52871 @ 2Media control, video playerPos: 22.48 /KNX/Applikationsbeschreibungen/Display - GUI/Mediensteuerung Video-Player/App. - Mediensteuerung Video-Player - DIN-A4 @ 9\mod_1269500928769_15.doc @ 52866 @ 2A CD player can be remotely controlled via the bus using the "Media control CD player" application.The symbols for "On/Off", "Player control" and "Volume" are shown first on the display. Via the push-button/rotary controlelement, the user can access a submenu ("Player control" and "Volume") or can switch directly on or off via a push-buttonoperation.In the submenu "Player control" the symbols for Start, Stop, Forward etc. are shown on the display. By turning the push-button/rotary control element, the user can select the desired function (focus) and trigger it with a push-button operation.If the volume is to be regulated, a special volume symbol is shown on the display which signals the user that: a turn to theright increases the volume and a turn to the left reduces the volume.A feedback signal from the connected actuator can not be shown here.Depending on the function, telegrams to the video player control are sent out for "Video on/off", "Video selection", "Videoplay", "Video stop", "Video pause", "Video rewind", "Video fast-forward", "Video volume". In addition, the function can betemporarily blocked via an additional 1-bit "Enable" communication object.Hint:The function is practical only when a corresponding actuator (video actuator) for video player activation is used asreceiver for the sent out telegrams.Media control objects, video playerNo. Object name Data type Flags0 Enable 1 Bit EIS1 / DPT 1.001 C, T, U1 Video On, Off 1 Bit EIS1 / DPT 1.001 C, W, T, U2 Video Play 1 Bit EIS1 / DPT 1.001 C, T3 Video Stop 1 Bit EIS1 / DPT 1.001 C, T4 Video Pause 1 Bit EIS1 / DPT 1.001 C, T5 Video Forward (Video Rewind) 1 Bit EIS1 / DPT 1.001 C, T6 Video Rewind (Video Forward) 1 Bit EIS1 / DPT 1.001 C, T7 Video Volume 4 Bit EIS2 / DPT 3.007 C, TPos: 22.49 /Produkthandbuch - DIN-A4/Überschriften/2. Ebene/G - L/Kurzzeittimer @ 9\mod_1269501915203_15.doc @ 52882 @ 22Short-time timerPos: 22.50 /KNX/Applikationsbeschreibungen/Display - GUI/Kurzzeittimer/App. - Kurzzeittimer - DIN-A4 @ 9\mod_1269501730439_15.doc @ 52877 @Via the alarm or timer function there is the option of triggering an acoustic signal at a specific time or after expiration of anentered time.The "short-time timer" application displays a timer function. There is the option here of triggering an acoustic signal via theinternal speaker after expiration of an entered time. The time (up to 12 h 59 min) is set by the user via the push-button/rotarycontrol element. After expiration of the set time, a signal tone is triggered on the unit which can be confirmed via the push-button/rotary control element.The set "Value for timer start" (ON or OFF) is sent out via a 1-bit "Timer status" communication object at timer start. The set"Value for timer expiration" (ON or OFF) is sent out at timer expiration.Short-time timer objectsNo. Object name Data type Flags0 Adjusting (1 Bit) 1 Bit EIS7 / DPT 1.007 C, W, T, U0 Adjusting (1 Byte) 1 Byte EIS6 / DPT 5.001 C, W, T, U1 Moving (1 Bit) 1 Bit EIS7 / DPT 1.008 C, W, T, U1 Moving (1 Byte) 1 Byte EIS6 / DPT 5.001 C, W, T, UPos: 22.51 /Spezial/Neues Layout 2010/Steuermodule_Neues_Layout_2010/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_1268898668093_0.doc @ 52149 @ 22