ABB CM30 User Manual
Also see for ControlMaster CM30: Communications supplementUser guideUser guideManualManual
                                                                                        | |
Contents
| 
ControlMaster CM30 and CM50Universal process controllers, 1 /4 and 1/ 2 DIN 5 Operator Level Menus16 IM/CM/ED–EN Rev. B5 Operator Level Menus5.1 Diagnostic Status BarOperator level menus are used to adjust setpoint(s) and output(s), selectsetpoints, select the view and to enter Basic and Advanced modes (viathe Access level).To access Operator Level menus:1. From the Operator Page, press to view the available menus.2. Use the / keys to scroll through the menus and menuoptions.3. Press to expand menu levels and to select menu options orpress to return to the previous menu.Menu functions are described in Table 5.1.Autotune Used to start or stop an autotune routine. This menu is enabled only if Autotune modeis On.Adjust Enables a value to be adjusted using the / keys.The icon next to a value indicates the current adjustable selection.Setpoint Select Selects the local setpoint to be used (displayed only if more than 1 local setpoint isconfigured).Alarm Acknowledge Acknowledges any active but unacknowledged alarms.View Select Selects the Operator view to be displayed.Enter Config. Level Displays the Access Level selection views – see Section 5.4, page 17 for securityoptions.Table 5.1 Operator Level Menu FunctionsFig. 5.1 ControlMaster Diagnostic Status Bar (ControlMaster CM30 Shown) Adjust...Setpoint Loop 1View SelectEnter Config. Mode Description of diagnostic or alarm tag.The highest prioritydiagnostic or alarm isdisplayed. Other activediagnostic / alarm statescan be viewed on theDiagnostic View – seepage 17.FailureMaintenanceOut of SpecCheck FunctionNAMUR (NE107) Status IconHigh Process AlarmLow Process AlarmHigh Latch AlarmLow Latch Alarm |
Related manuals for ABB ControlMaster CM30
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine