ABB CM30 User Manual
Also see for ControlMaster CM30: Communications supplementUser guideUser guideManualManual
                                                                                        | |
Contents
| 
ControlMaster CM30 and CM50Universal process controllers, 1 /4 and 1/ 2 DIN 7 Advanced Level24 IM/CM/ED–EN Rev. B7 Advanced Level7.1 Device SetupProvides access to standard setup parameters to determine the type of control / indication required. Also provides the ability to create non-standardconfigurations for special application requirements.Initial SetupApp Template Application templates enable standard configurations for particular applications to becreated as simply as possible. When a template is selected, the controller assumes thepreset form for that template. The inputs and function blocks aresoft-wired automatically to perform the selected function.See Section 8, page 64 for templates available to Extended and Dual functionalitycontrollers.Loop 1 (2) Output Type The appropriate output function block, relay, digital and analog outputs are configuredand soft-wired.Loop 2 Output Type is available only if a Dual Loop application template is selected –see Section 8, page 64 for template details.See Appendix D, page 84 for output assignments.Loop 1 (2) Split O/P Loop 1 Split O/P is available only if the Loop 1 Output Type is Split Output.Loop 2 Split O/P is available only if a Dual Loop or Cascade application template isselected and the Loop 2 Output Type is Split Output.These types of outputs split the Control (PID) output signal (see page 20) into 2 signals.The linear relationship between the PID O/P and the 2 outputs can be configured in theControl configuration – see page 36.See Appendix D, page 84 for output assignments.Instrument Tag A 16-character alphanumeric tag, displayed in the title bar on Operator pages – seepage 16.Loop 1 (2) Tag Available only if a Cascade or Dual Loop application template is selected – see Section8, page 64 for template details.The tag is displayed in Operator pages – see page 16.Mains Freq Used to set the internal filters to reduce mains power frequency interference.MenuDevice SetupExit Select |
Related manuals for ABB ControlMaster CM30
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine