ABB COMMANDER 1900 Series Programming Manual

Also see for COMMANDER 1900 Series: Programming guide Installation guide User guide Operating guide

Contents

ABB COMMANDER 1900 Series Programming Manual Manual pdf 10 page image

…3 BASIC CONFIGURATION LEVEL3.2 Set Up Pen Range/Event SourceInformation.• Trend pens – have an independent chart range allowing a selected part of the engineering (display) range to be used forextra resolution on the chart.• Three position event pen function – can be driven by digital inputs, alarms, logic equation results and real time events(when timer option is fitted).Select Pen Range (in engineering units)0 (Eng. Range Low)1000 (Eng. Range High)Select 'In' Source Select 'Out' Source700 (Pen Range High)400 (Pen Range low)*Source onSource offSource onSource off*In source takes priority if bothsources enabledRecord Function Event FunctionPen 2 at 40%Pen 3 at 60%Pen 1at 20%*Pen 4 at 80%Event Pen Chart Position*With Real Time Event Penoption fitted, Pen 4 is above100%Page Header – Set Up Pen RangeTo advance to Set Up Chart Page press the switch.Select PenSelect the pen to be programmedNote.• In the remaining frames press the switch to view the pen selected.• Record (trend) or event pen function is set in the ADVANCED CONFIGURATION LEVEL (if TrueTime Event Pen option is selected, the fourth pen is fitted with a special pen arm and is setautomatically for event pen function) – see Section 4.3, Set Up Pen Functions.Pen Range HighSet the maximum value required on the chart, in engineering units (the value must be within theengineering range set in Set Up Input Page – see Section 3.1).Pen Range LowSet the minimum value required on the chart, in engineering units (the value must be within theengineering range set in Set Up Input Page).In SourceSelect a source to move the pen inwards on the chart.For a description of sources – see Table 3.1 on page 15.Out SourceSelect a source to move the pen outwards on the chart.For a description of sources – see Table 3.1 on page 15.Return to Select Pen frame.SEt UPPENrNGSELECtPEN 4PEN 3PEN 2PEN 1PEN LO––––––PEN HI––––––IN SrCEQN–4NONNOUtSrCEQN–4NONNNONEEVENTRECORDNONESELECtSELECt