|
20ABB I N D U S T R I A L D R I V E S D C S 8 8 0 Q u i C k g u i D e - 3 A D W 0 0 0 4 8 0 R 0 2 0 120ABB I N D U S T R I A L D R I V E S D C S 8 8 0 Q u i C k g u i D e—DCS880 control panelRefer to ACS-AP-x assistant control panels user’s manual (3AUA0000085685) for detailed information.BE_PAN_002_DCS880_overview_a.aiStatus LED:• Green for normal operation• Flashing green for alarms• Red for faultsSoft key 1Local reference upLoc/Rem – Changes between local andremote control of the drive.Stop – Stops the drive in local controlfrom DCS Control Panel and whenthe Start-up Assistant is used.Soft key 2Local reference downHelp – Displays context sensitiveinformation when the button is pressed.Start – Starts the drive in local controlfrom DCS Control Panel and when theStart-up assistant is used.USB connection to composer PC ToolDirection of speedActual control locationLocal reference - change by arrowbuttons (up/down)Signals selected by edit Home View(option menue)DCS880 Set up control panel assistantGeneral display featuresFollowing modes are available in the MAIN MENU:1. Basic assistant (menue / assistant)a. Data and time2. DCS880 assistant (menue / assistant)a. Name plate datab. Autotuning field current controllerc. Autotuning armature current controllerd. First time motor turninge. Speed feedback assistant(Tacho fine tuning not available)f. Autotuning speed controllerg. Field weakening assistant (only used whenmaximum speed is higher than base speed)h Make a back up3. Parameter backup (menue / parameter backup)Parameters entered by assistant99.07 M1 used field exciter type99.10 Nominal mains voltage99.11 M1 nominal current99.12 M1 nominal voltage99.13 M1 nominal field current99.14 M1 nominal (base) speed30.11 M1 minimum speed30.12 M1 maximum speed30.19 Minimum torque 130.20 Maximum torque 130.35 M1 current limit bridge 130.34 M1 current limit bridge 231.30 M1 overspeed trip margin31.44 Armature overcurrent level94.23 OnBoard encoder pulses/revolution94.24 OnBoard encoder type94.25 OnBoard encoder speed calculation mode94.07 M1 tacho type94.08 M1 tacho voltage at 1000 rmp90.41 M1 feedback selection23.12 Acceleration time 123.13 Deceleration time 131.58 M1 field current low level28.17 M1 EMF/field control modeDCS880 commissioning is supported by assistants available in the control panel.The digital inputs can be tested by 10.04 DI force data.The analog inputs can be tested by 12.11 AI1 actual value and AI1 scaled value 12.12 (AI2 = 12.21 and 12.22).Start commisioning always with date and time setting, follow the assistants and close with parameterbackup in the control panel.
PreviousNext |