Displays available settable parameters which include scheme type, coordinationtime for blocking coordination scheme, minimum duration of a carrier send signaland security timer for loss of carrier guard detection.9.3.7.3 Current reversal and weak-end infeed logic for distance protectionZCRWPSCHMain menu/Settings/Setting Group N/Scheme communication/ZCurrentReversalWEI(PSCH,85)/EFCADisplays available parameters for setting operating modes, pickup times, timedelays, rated values etc.9.3.7.4 Current reversal and weak-end infeed logic for residual overcurrentprotection ECRWPSCHMain menu/Settings/Setting Group N/Scheme communication/EFCurrentReversalWEI(PSCH,85)/EFCADisplays available settable parameters including operation, rated values, time dataand other related settings.9.3.7.5 Scheme communication logic for residual overcurrent protectionECPSCHMain menu/Settings/Setting Group N/Scheme communication/EFSchemeCommunication(PSCH,85)/EFC1Displays setting parameters for operation, scheme type and coordination time.9.3.7.6 Local acceleration logic ZCLCPLALMain menu/Settings/Setting group N/Scheme communication/LocalAccelerationLogic(PLAL)/ZCLCDisplays available settable parameters for setting OperationOn or Off, setting timedelays, enable and disable various functions.9.3.8 Secondary system supervision9.3.8.1 OverviewUnder Secondary circuit supervision there are settings for Current circuitsupervision and Fuse failure. There are five instances of Current circuit supervisionwith parameters for minimum operation current, rated current and operation. Thereare six instances of Fuse failure supervision parameters for setting rated current,voltage, operation mode and several other parameters.1MRK 511 188-UEN C Section 9Read and change settings59Operator's manual