24.9 Signal matrix for binary outputs SMBO SEMOD55215-1 v224.9.1 Application SEMOD55213-5 v4The Signal matrix for binary outputs function SMBO is used within the ApplicationConfiguration tool in direct relation with the Signal Matrix tool. SMBO represents theway binary outputs are sent from one IED configuration.24.9.2 Setting guidelines SEMOD55228-5 v2There are no setting parameters for the Signal matrix for binary outputs SMBOavailable to the user in Parameter Setting tool. However, the user must give a name toSMBO instance and SMBO outputs, directly in the Application Configuration tool.These names will define SMBO function in the Signal Matrix tool.24.10 Signal matrix for mA inputs SMMI SEMOD55233-1 v224.10.1 Application SEMOD55237-5 v2The Signal matrix for mA inputs function SMMI is used within the ApplicationConfiguration tool in direct relation with the Signal Matrix tool. SMMI represents theway milliamp (mA) inputs are brought in for one IED configuration.24.10.2 Setting guidelines SEMOD55247-5 v2There are no setting parameters for the Signal matrix for mA inputs SMMI available tothe user in the Parameter Setting tool. However, the user must give a name to SMMIinstance and SMMI inputs, directly in the Application Configuration tool.24.11 Signal matrix for analog inputs SMAI SEMOD55751-1 v21MRK 504 163-UUS A Section 24Basic IED functionsTransformer protection RET670 2.2 ANSI 969Application manual
