The connection ports of all symbols are activated.5.2. Drag the connection from the source connection port and drop it in thetarget connection port.A connection line between the source and target connection ports is drawn.Alternatively, click on the source port and then click once at the target portto create the connection. Move the mouse pointer on the nearestconnection port to ensure the target port. A “+” sign appears.5.3. Right-click or press ESC to cancel the connection creation.Once a link has been used to connect the symbols, the link follows the symbolwhen it is moved to a new position or when it is rotated.6. Move the mouse pointer away from the symbol's port for all the connection portsof the symbols to become deactivated.7. Select a symbol and modify its properties in the Object Properties pane.The symbol name can also be changed by double-clicking the symbol.8. In the Object Properties pane, use control to relate dynamic symbols to theirsource data.6.1.7 Language TranslationLanguage Translation is used to translate configuration data text into differentlanguages. Configuration data includes widget properties, page properties and symbolcaptions. All the translatable properties, that is, text properties, are displayed on thelanguage translation tab.With Language Translation the users can add a new language from the list oflanguages supported by the IED and set the translated text for the language. Once thetranslations are written to the IED they can be displayed on the LHMI based on thelanguage selected.Section 6 1MRS759117 ALHMI engineering120 REX640Engineering Manual
