ABB Relion 630 Series Communication Protocol Manual

Also see for Relion 630 Series: Quick start guide Quick start guide Operation manual Engineering manual Product guide

Contents

ABB Relion 630 Series Communication Protocol Manual Manual pdf 29 page image

IET600• A SCD file is to be opened or a SCD, ICD or CID file for the particular IED(s) isto be imported/merged.• For each IED, the data sets, the control blocks for reporting (this meansunbufffered/buffered reporting and GOOSE) and the properties for each reportcontrol block are to be defined.• If client definitions (like client. ICD) are required in the system configuration,they are merged into IET600 and connected to the unbuffered/buffered reportcontrol blocks.• For each IED, the primary/conducting equipment with their relation to the usedlogical nodes must be defined in the substation section.• Logical nodes, which are not related to the conducting equipment, must beincluded in the bay level in the substation section.• The resulting SCD file is exported from IET600.The SCD file is to be imported to PCM600 to receive GOOSE data. For each IED thatreceives GOOSE information, the received data is connected to the applications usingSMT in PCM600.3.5 Engineering concept in IEC 61850-6• Top-down approach means that the system engineering tool has ICD filesavailable for each IED to be included in the system configuration. The ICD filesmay be of an template type and represent a pre-configured IED.• Bottom-up approach means that the configurations are produced by the IED tool,and that are exported as ICD files (or SCD file) to be imported by system tools.1MRS756793 E Section 3Substation Configuration description Language (SCL)630 series 23Communication Protocol Manual