ABB Tina 7A Original Instructions Manual

Contents

2TLC172139M0201, rev. B 2 www.abb.com/ jokabsafety2013-03-02Read and understand this documentPlease read and understand this document before using the products. Please consult your ABB/JOKAB SAFETYrepresentative if you have any questions or comments.WARRANTYABB/JOKAB SAFETY’s exclusive warranty is that the products are free from defects in materials and workmanshipfor a period of one year (or other period if specified) from date of sale by ABB/JOKAB SAFETY.ABB/JOKAB SAFETY MAKES NO WARRANTY OR REPRESENTATION, EXPRESSED OR IMPLIED,REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OFTHE PRODUCTS, ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HASDETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OR THEIR INTENDEDUSE. ABB/JOKAB SAFETY DISCLAIMS ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED.LIMITATIONS OF LIABILITYABB/JOKAB SAFETY SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIALDAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS,WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY.In no event shall responsibility of ABB/JOKAB SAFETY for any act exceed the individual price of the product onwhich liability asserted.IN NO EVENT SHALL ABB/JOKAB SAFETY BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHERCLAIMS REGARDING THE PRODUCTS UNLESS ABB/JOKAB SAFETY’S ANALYSIS CONFIRMS THAT THEPRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TOABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.SUITABILITY FOR USEABB/JOKAB SAFETY shall not be responsible for conformity with any standards, codes, or regulations that applyto the combination of products in the customer’s application or use of the product. At the customer’s request,ABB/JOKAB SAFETY will provide applicable third party certification documents identifying ratings and limitations ofuse that apply to the products. This information by itself is not sufficient for a complete determination of thesuitability of the products in combination with the end product, machine, system, or other application or use.The following are some examples of applications for which particular attention must be given. This is not intendedto be an exhaustive list of all possible uses of the products, nor is it intended to imply that the uses listed may besuitable for the products:Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses notdescribed in this document.Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment,amusement machines, vehicles, and installations subject to separate industry or government regulations.Systems, machines, and equipment that could present a risk to life or property.Please know and observe all prohibitions of use applicable to the products.NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTYWITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS,AND THAT THE ABB/JOKAB SAFETY PRODUCT IS PROPERLY RATED AND INSTALLED FOR THEINTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.PERFORMANCE DATAWhile every effort has been taken to ensure the accuracy of the information contained in this manual ABB/JOKABSAFETY cannot accept responsibility for errors or omissions and reserves the right to make changes andimprovements without notice. Performance data given in this document is provided as a guide for the user indetermining suitability and does not constitute a warranty. It may represent the result of ABB/JOKAB SAFETY’Stest conditions, and the users must correlate it to actual application requirements. Actual performance is subject tothe ABB/JOKAB SAFETY Warranty and Limitations of Liability.