EN 12 Use3.4.4 Rest warmth indication3.4 Cooking functions After use of the cookingzone, the surfacewill remain hot for some time. After3.4.1 Start-stop switching off the zone or the appliance, inTo start, push the on/off button. On the the display the letter ”H“ lights up for somedisplay the ”0" positions will light up. time. During this time no heat sensitiveTo switch off the zone[s], you also push products may be placed on the hot zone.the on/off button. The display turns black There is also a risk of burning or fire.or shows the symbol ”H“ [rest warmth].3.4.5 Booster function3.4.2 Activating the cooking zone The booster function generates an extraPush the on/off button first. Now select high power during maximal 10 minutes,the required zone and touch the according for example to quickly boil water. Theposition on the display. The control light electronical powermanagement regulatesnext to the zone lights up as well. Now the maximum available power. If theadjust the required power. To stop, adjust power boost is activated, this mightthe power to ”0" In the display a ”0“or influence the power of another linked”H“[rest warmth] symbol appears. induction zone. This happens when theIf nothing is touched, the display requested power exceeds the maximumautomatically switches into the waiting- available net power. On the display of theposition. influenced induction zone, the ”9” willstart blinking, after a few seconds it will3.4.3 Pan detection first indicate and then supply theThe pan detection function is built in for maximum available power.safety. Without a pan the induction doesnot work/ If there is not suitable or no panat all, it is impossible to generate orchange the power. In the display a ”U“symbol appears. It disappears if a suitablepan is placed. If a pan is removed from thecooking zone, the current function will beinterrupted. The display shows the ”U“symbol, untill the pan is replaced, afterwhich the cooking process is continued.