ABL eMH3 Installation Manual

Also see for eMH3: Operating manual Quick start guide Installation manual Operating manual Configuration

Contents

ABL eMH3 Installation Manual Manual pdf 10 page image

prepArAtIons, InstAllAtIon And tAkIng Into operAtIon6Preparations, installation and taking intooperationIntroducing the productThe ABL Wallbox model variants are entirely manufactured in Germany and at all timescomply with the regulations and norms for the charging of electric vehicles applicablethroughout Europe according to IEC 61851-1, Mode 3 – please also refer to the sectionon”Guidelines & Norms” on page 18.We place the highest value on user safety in all our products. Your wallbox thereforeoffers integrated DC fault current detection, guaranteeing the faultless operation ofthe internal RCCB in case of DC fault currents generated by the vehicle.The wallbox is especially easy to operate during everyday use: LED lights on the wall-box housing cover allow you to check the current operating status at any time. Shoulda malfunction occur, you can identify the cause by its specific LED error code withouthaving to open the housing. After being taken into operation by a specialist contractor,the ABL Wallbox is ready for charging at any time, while each charging process mustbe separately authorized via the integrated RFID module (model variants 3W14A2 and3W22A2 only).Unpacking and components includedThe ABL Wallbox package includes a range of accessory components needed for in-stallation and proper operation. Therefore, please check immediately after unpacking(together with the customer, if required) whether the following components are in-cluded:COMPONENT QUANTITY DESCRIPTIONWallbox 1 Wallbox, consisting of plastic housing with lockablecover and separate mounting plate.Quick start guide 1 Quick start guide including safety notices in printedformInstallation kit 1Set of fixings for wall mounting, consisting of 2 x 4screws as well as matching wall plugs, triangular key,strain relief including screws (2 pcs), sealing grom-mets for openings at the back of the housing (3 pcs)Should one or more components be missing after unpacking, please contact your localABL distributor immediately.