prepArAtIons, InstAllAtIon And tAkIng Into operAtIon7PLEASE NOTE!The carton in which the ABL Wallbox is delivered offers optimal protec-tion against external influences during transport and storage. If possible,keep this carton and use it to pack the ABL Wallbox, should you need tosend it to the manufacturer or otherwise transport it because of a mal-function or similar.Identifying your model variantThe ABL Wallbox is available in a range of model variants that are mechanically andelectrically tailored to different application profiles. When you open the housing coverfor installation, you will find behind it on the lower part of the electronic componentscover a product information label, which will carry the ABL model number. For identi-fication, the model code (3WXXXX) as well as the power supply ratings (voltage, fre-quency, current) indicated below it are especially relevant.Using the ABL model number, please alwaysensure before installation that your wallboxmodel variant is the one whose installationis described in this document.You can find a list of the wallbox model variants described in this manual in the tablebelow.MODEL GRID CONNECTION MODEL VARIANT3W14A1 230 V50 Hz 32 AThree-wire system with three outer conductors andno neutral conductor; two integrated charging sock-ets according to IEC 62196-2 Type 2 for the sepa-rately available Mode 3 charging cable; internal TypeA RCCB; internal DC fault current detection; max.charging output up to 2x 7.2 kW3W14A2 230 V50 Hz 32 AThree-wire system with three outer conductorsand no neutral conductor; two integrated chargingsockets according to IEC 62196-2 Type 2 for theseparately available Mode 3 charging cable; accesscontrol via RFID; internal Type A RCCB; internal DCfault current detection; max. charging output up to2x 7.2 kW3W14A1000012016-08-173W14A1~230V 50Hz 32AIP44IEC 61851-1IEC 61439-7 ACSEVMADE IN GERMANYABL SURSUM Bayrische Elektrozubehör GmbH & Co. KG3W14A100001