ACM Security System Advanced MPEG-4 DVR User Manual
                                                                                    | |
Contents
| 
41y Click( )By Duration box to set up the recording duration and prevent recording caused by event.The duration time can be controlled by previous setting mode: RECORD>Settings>Eventy Choose ‘OK’ to confirm the setting.4.6.3 Video Lossy Please click ( ) LINK>Video Loss, and the following screen will appear.y Select cameras for recording while the motion sensor is in operation, and alarm outputs, and set up E-mail addresses fornotification.y Link Notification displays E-mail addresses registered in DEVICES>Network>Notification.y Please follow the setup procedures below.① Click ( ) Video Loss frame, and select Video Loss 1.② Select cameras for recording when Video Loss 1 is on. Please check 5 a check box under Link Camera. More than twocameras can be set.③ Select alarm outputs to be worked when Video Loss 1 is on. Please check 5 a check box under Link Alarm Out. Morethan two alarm outputs can be set.④ Select E-mail addresses for notification when Video Loss 1 is on. Please check 5 a check box under Link Notification.More than two E-mail addresses can be set.⑤ Repeat the above procedure for Video Loss 2~ Video Loss16.y Click No Beep 5 to deactivate alert sounds from video loss. Apply to all channel.y Choose ‘OK’ to confirm the setting.4.6.4 System Eventy Please click ( ) LINK>System Event and the following screen will appear.y Select recording cameras and alarm outputs while Emergency recording using EMERGENCY key, and set E-mailaddresses for notification.y Link Notification displays E-mail addresses registered in DEVICES>Network>Notification.y Please follow the setup procedures below.① System Event frame displays Emergency, which you do not have to change.② Select cameras for recording when emergency occurs. Please check 5 a check box under Link Camera. More than twocameras can be set.③ Select alarm outputs to be worked when emergency occurs. Please check 5 a check box under Link Alarm Out. Morethan two alarm outputs can be set. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine