ACM Security System Advanced MPEG-4 DVR User Manual
                                                                                    | |
Contents
| 
435.1 Viewing5.1.1 First Imagey Power on DVR, and the following live video will appear, while viewing and recording at the same time.y The screen will display date/time and icons below.Icon DescriptionContinuous recording modeEvent recording mode (Alarm In/Motion)In recordingPTZ registration/PTZ modeIn Audio recording4 CMS Access Indication/No. of accesses (up to 4)In channel sequencingSetup in HDD Overwrite modeSetup in HDD None Overwrite mode(recording)Setup in HDD None Overwrite mode(HDD Full)y On the right bottom side of the screen, disk usage will show by %.y On the left low side of the screen, , , , , icon will show as the progress.y At the normal state, HDD Overwrite mode is on and icon shows.y When Overwrite mode is off (see 4.2.1 Information>Record>Overwrite Setting), will show. And when the diskbecomes full, the icon will be changed into .y Click Emergency recording button, icon will show.y Click Audio button, icon will show. And click channel button, then you can change only audio channel.5.1.2 View Formatsy The available view formats when the Main Monitor is in viewing mode include Full Screen, Split Screen, ChannelSequencing Screen, and PEP screen.– Full Screen: Please press camera select key (1~16) to view the corresponding camera image in full view format.5. Operation Instructions |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine