ACP RCS10DA Service

Contents

ACP RCS10DA Service Manual pdf 9 page image

©2010 ACP, Inc. 16023293 Rev. 0 9General InformationUnpacking Equipment• Inspect equipment for damage such as dents in dooror dents inside oven cavity.• Report any dents or breakage to source of purchaseimmediately. Do not attempt to use oven if damaged.• Remove all materials from oven interior.Equipment Placement• Do not install equipment next to or above source ofheat, such as pizza oven or deep fat fryer. This couldcause microwave oven to operate improperly andcould shorten life of electrical parts.• Do not block or obstruct air filter. Allow access forcleaning.• Install on level countertop surface.AAAA—Allow at least 1½ inches / 3.81 centimeters of clearancearound top and sides of equipment. Proper air flow aroundequipment cools electrical components. With restricted airflow, oven may not operate properly and life of electricalparts is reduced.Radio InterferenceMicrowave operation may cause interference to radio,television, or similar equipment. Reduce or eliminateinterference by doing the following:• Clean door and sealing surfaces of oven according toinstructions in “Care and Cleaning” section.• Place radio, television, etc. as far as possiblefrom oven.• Use a properly installed antenna on radio, television,etc. to obtain stronger signal reception.Oven FeaturesRemovableSplatter Shield(Not Shown)Oven ControlPadsOven DisplayOven Door Windowand Interior LightFilter