ACR Electronics COBHAM RCL-300A Product Support Manual
Also see for COBHAM RCL-300A: Product support manual
                | |
Contents
|
Y1-03-0232F 10 Press the Up or Down arrows to raise or lower the searchlight beam. To activate the XRCiZ™ feature, press and hold the ON/OFF buttonfor more than 5 seconds. The green LED indicates that the XRCiZ™feature is enabled. To deactivate the XRCiZ™ feature, press and hold the ON/OFFbutton for more than 5 seconds. The red LED indicates that theXRCiZ™ feature is disabled. An LED blinking red/green indicates that then XRCiZ™ feature isnow “exercising” the searchlight. To activate the Self-Park feature, press and hold the Point Pad™Speed button for more than 5 seconds. While the Self-Park feature is operating the searchlight, pressing anyPoint Pad™ button will stop the park command and leave thesearchlight to follow any additional commands. To deactivate the Self-Park feature, press and hold the Point Pad™Speed button for more than 5 seconds. An LED blinking re/green indicates that the searchlight is seeking itsSelf-Park position. The Self-Park and XRCiZ™ features are normally disabled whenpower is lost to the URC-300 Master Controller and will have to bereactivated.NOTE: Self-Park and the XRCiZ™ features are only available whenpaired with a URC-300 Master Controller.Figure 6 |
Related manuals for ACR Electronics COBHAM RCL-300A
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine