ACR Electronics NAUTICAST AIS INLAND Manual

Also see for NAUTICAST 2662: User manual Installation manual Installation manual Manual Manual

ACR Electronics NAUTICAST AIS INLAND Manual Manual pdf 42 page image

d) Security LogThe Security Log is implemented to show the “switched off” – times of the transponder.In standard operation, this Log should not contain any entries.3.5.3 Voyage Settings (User Password Protected)Select the “Voyage Settings” – Sub Menu from the Main Menu with the cursor button [Up] & [Down]or press No. 3 on the keyboardNOTE: The default password from the factory is mentioned on your AIS display at the protectionfoil. (see Appendix 7.3 for password information).N 1o22' E 0o16' |1>0.10|2>1.30|3>1.80nm************* Version Info *************## # ### ### ### ## # # #### # # # # # # # # ## # ##### # ## # ### #### ##### ### # # # # # # # # # ## ## # # ### # # # # # # # ### #Hardware: AIS Transponder Class A R4 JSoftware: 2.0.S116.nnnnSW Stamp: Month Day Year DateModem HW: Issue J SeCo:nModem SW: 01.10.nn Battery: OK----------------------------------------| | | | <-BackN 1o27' E 0o20' |1>0.10|2>1.30|3>1.80nm************* Security Log *************....StartTime..............EndTime......01/15/2001 03:11 until 01/15/2001 04:00----------------------------------------| | | | <-BackN 1o20' E 0o13' |1> N/A|2>0.00|3>0.10nm|----------------------------------| Menu-----| || +- 1. MessagesView | +- 2. AIS Status| +- 3. Voyage Settings-----| +- 4. Ship Settings| +- 5. Transponder ConfigurationMsg. | +- 6. Service Configuration| +- 7. Display Settings-----| +- 8. Graphical Display Settings|Displ|----------------------------------------NUM|Select->| | |<-Back42Y1-03-0211G