ACR Electronics NAUTICAST AIS INLAND Manual

Also see for NAUTICAST 2662: User manual Installation manual Installation manual Manual Manual

ACR Electronics NAUTICAST AIS INLAND Manual Manual pdf 8 page image

1.3 Entering Ship SettingsSelect from the Main Menu “Ship Settings” Menu is USER password protected. The defaultpassword from the factory is mentioned on your AIS display at the protection foil. (see Appendix7.3 for password information). Enter Password and use the up and down arrows to edit ShipSettings then press Enter or the numeric reference on the keypad to select and edit.Save after editing.Main Menu Example:Select Ship Settings and press M5 [Enter]. Enter User Password and Continue.Ship Settings Menu Example:Select and enter Call Sign (ATIS).Select and enter Ship Name.Enter external GPS Antenna PositionEnter internal GPS Antenna PositionEnter ship len and beam in [dm]Setting the Internal and External GPS Antenna Position.Note: It is critical for the proper orientation of your ship to other AIS users to enter this dataaccurately.Example: Length of ship = 220m and Beam = 43m.N 1 o23' E 0 o16' |1>0.01|2>1.30|3>1.80nm|----------------------------------| Menu-----| || +- 1. MessagesView | +- 2. AIS Status| +- 3. Voyage Settings-----| +- 4. Ship Settings| +- 5. Transponder ConfigurationMsg. | +- 6. Service Configuration| +- 7. Display Settings-----| +- 8. Graphical Display Settings|Displ|----------------------------------------NUM|Select->| | |<-BackN/A N/A |1> N/A|2> N/A|3> N/Anm*********** Convoy Settings ************Call Sign:OEZ1234 /\ +ShipName :INLAND SHIP / \|Ref.Points ext int | |A: 200m 220m | AB: 20m N/A | |C: 10m 10m | +--|D: 33m 33m | | BLen (A+B): 220m 220m | | |Beam(C+D): 43m 43m +-C-+D-+Len [dm]: 2199dmBeam [dm]: 429dm>>> DATA OK. PRESS M5 TO SAVE DATA <<<----------------------------------------| Save | | | Back8Y1-03-0211G