ACRONIS TRUE IMAGE 9.1 - ENTERPRISE SERVER User Manual

Also see for TRUE IMAGE 9.1 - ENTERPRISE SERVER: User guide User guide User guide User guide User guide

Contents

ACRONIS TRUE IMAGE 9.1 - ENTERPRISE SERVER User Manual Manual pdf 57 page image

If you want more functionality during restoration, write a standalone version of AcronisTrue Image Enterprise Server to the rescue disk. Then you will be able to configure therestore task using Restore Data Wizard, use Acronis Snap Restore or Acronis UniversalRestore etc.Under Advanced tab you can select full, safe or both Acronis True Image Enterprise Serverloader version. The safe version does not have USB, PC card or SCSI drivers and is usefulonly in case the full version does not load. If you want the computer, booted from themedia, to be accessible for remote control with Acronis True Image Management Console,add Acronis Bootable Agent to the media. If you have other Acronis products, such asAcronis Disk Director Suite, installed on your computer, the bootable versions of theseprograms’ components will be offered as Advanced as well.In case you check Do not place additional components if there is no free space box,the program will try to write at least basic component to media, short of space.6.3.11 Additional settings1. Validate backup archive upon operation completionThe default setting – disabled.You can choose to check the backup data integrity. Verification will be performedimmediately after the archive is created.To check data from an incremental backup, you must have all previous incremental backupfiles and the initial full backup. If any of successive backups is missing, validation isimpossible.To check data from a differential backup, you must have the initial full backup as well.However, if you created several differential or both incremental and differential backupsbased on the same full backup (and therefore, in the same folder), you will need ALL ofthese successive backups to validate the archive.2. Overwrite data on a tape without user confirmationThe default setting – disabled.A full backup, when created on a tape drive, overwrites all data stored on the tape (see3.9Backing up to tape drive for more information). In this situation, Acronis True ImageEnterprise Server will warn that you are about to lose data on the tape. To disable thiswarning, check the middle box.3. Ask for first media while creating backup archives on removable mediaThe default setting – enabled.You can choose whether to display the Insert First Media prompt when backing up toremovable media. With the default setting, backing up to removable media may beimpossible if the user is away, because the program will wait for pressing OK in the promptbox. Therefore, you should disable the prompt when scheduling a backup to removablemedia. Then, if the removable media is available (for example, CD-R/RW inserted) the taskcan run unattended.Copyright © Acronis, Inc., 2000-2006 57