ACRONIS TRUE IMAGE 9.1 - ENTERPRISE SERVER User Manual

Also see for TRUE IMAGE 9.1 - ENTERPRISE SERVER: User guide User guide User guide User guide User guide

Contents

ACRONIS TRUE IMAGE 9.1 - ENTERPRISE SERVER User Manual Manual pdf 91 page image

Chapter 13. Transferring the system to anew disk13.1 General informationSooner or later any server user finds out that his hard disk is too small. If you just don’t havespace for more data, you can add another disk just for data storage as described in thefollowing chapter.However, you might find that your hard disk does not have enough space for the operatingsystem and installed applications, preventing you from updating your software. In this case,you have to transfer the system to a higher-capacity hard disk.This feature is available in Acronis True Image Enterprise Server local version only.Transferring systems using Acronis True Image Management Console is impossible.To transfer the system, you must first install the disk in the server. If a server doesn’t have abay for another hard disk, you can temporarily install it in place of your CD-ROM. If that isnot possible, you can clone a hard disk by creating its image and restoring it to a new harddisk with larger partitions.There are two transfer modes available: automatic and manual.In the automatic mode, you will only have to take several simple actions to transfer all thedata, including partitions, folders and files, to a newer disk, making it bootable if the originaldisk was bootable.There will be only one difference between these disks – partitions on the newer disk will belarger. Everything else, including the installed operating systems, data, disk labels, settings,software and everything else on the disk, will remain the same.This is the only result available in the automatic mode. The program can only duplicate theoriginal disk layout to the new one. To obtain a different result, you will have to answeradditional questions about cloning parameters.The manual mode will provide more data transfer flexibility.1. You will be able to select the method of partition and data transfer:• as is• new disk space is proportionally distributed between the old disk partitions• new disk space is distributed manually2. You will also be able to select operations to perform on the old disk:• leave partitions (and data!) on the old disk• remove all information from the old disk• create new partitions on the old disk (and remove all the older information)On program screens, damaged partitions are marked with a red circle and a white crossinside in the upper left corner. Before you start cloning, you should check such disks forerrors using corresponding operating system tools.Copyright © Acronis, Inc., 2000-2006 91