1ACS-24UHF / Eagle with MTC User Manual1October 28, 2013This manual is based on Make The Cut (MTC), version 4.6.1. Because of regular updates to MTC, werecommend not printing this entire document, but rather read it on the screen or print only those pages you needat any given time.Features of this Online Interactive User ManualTurning Pages: To turnpages, click on arrows, enter a page number, click orswipe on the lower corners of the pages, or click ontriangles on right or left sides of pages.Enable Full Screen: Click for Full Screenmode. Press Esc or click on icon to return to regularmode.Print: Select pages to print to your printer. It isrecommended that you do not print the entire manualas it is updated every six months or so.Bookmark: Table of Contents opens and you canclick on any chapter, section, or subsection toimmediately access.Thumbnails: Displays the thumbnail images forall pages in the book.Sound: Click to turn off or turn back on thepage flipping sound.Zoom: Zoom in and out, as needed. You canalso double click on a page to zoom in or out. Notethat while zoomed in, moving the mouse automaticallyscrolls the page up and down.Search: You can search by any word(s) in themanual. Click on the Search icon, enter the word(s),and all pages with that word or words will be listed.Click on a listing to be taken to that page.Videos: This user manual contains numerous links to online videos. Click on these green Video iconsto open either a You Tube or Vimeo hosted video and learn the topic in that particular section of the manual.Past experience has shown that watching videos can be extremely beneficial when learning software andcutting applications.Where to Start Thank you for choosing an ACS digital die cutter. Before using a blade in your new cutter, we suggest youread Chapters 1 and 2 and watch the videos provided via links in these two chapters. If you run into difficulties with the operation of your cutter, turn off the power and look for a solution in thismanual. Appendix B is a list of Troubleshooting FAQ’s. If you continue to have technical questions orissues, please contact your supplier as soon as possible. For additional cutter support, please visit our Yahoo group at: http://groups.yahoo.com/group/Klic-N-Kut/ orour forum at http://knkusa.com/forums/1© 2009, 2010, 2011, 2012, 2013 Accugraphic Sales, Inc., All Rights Reserved
