54 If you want the shapes in a full circle, double the Rotate By setting. In this case, you would enter 36 deg (2x 18). If you then want to overlap the circles, decrease the Offset Y to located them closer to the center: The Offset X value will move each shape that distance in the X direction. Note how an increasing value of Xaffects the arrow shape in this duplication: The designing possibilities are unlimited with this magnificent feature! Be sure to watch the video linked atthe beginning of this section.3.11 Undo/RedoUndo As with most Windows applications, there is an Undo function to reverse the most recent steps performed.You can use any of the following to execute the Undo function: Click on the Undo icon on the File Toolbar Press Ctrl-Z Go to Edit>Undo. If you are experiencing software crashes due to memory limitations, two solutions are available:Click on Acceptwhen done.Enter 9Changeto 36Decreaseto 20Click hereOffset X: 0 Offset X: 15 Offset X: 30
