ACTi E11 Hardware Manual

Also see for D51: Installation guide User manual Hardware manual

Contents

www.acti.comHardware Manual12Using the Default Camera IP AddressIf there is no DHCP server in the given network, the user may have to assign the IP addressesto both PC and camera manually to make sure they are in the same network segment.When the camera is plugged into network and it does not detect any DHCP services, it willautomatically assign itself a default IP:192.168.0.100Whereas the default port number would be 80. In order to access that camera, the IP addressof the PC has to be configured to match the network segment of the camera.Manually adjust the IP address of the PC:In the following example, based on Windows 7, we will configure the IP address to192.168.0.99 and set Subnet Mask to 255.255.255.0 by using the steps below:1 23 4