ACTi E11 Hardware Manual
Also see for D51: Installation guideUser manualHardware manual
                | |
www.acti.comHardware Manual13Manually adjust the IP addresses of multiple cameras:If there are more than 1 camera to be used in the same local area network and there is noDHCP server to assign unique IP addresses to each of them, all of the cameras would thenhave the initial IP address of 192.168.0.100, which is not a proper situation for networkdevices – all the IP addresses have to be different from each other. The easiest way to assigncameras the IP addresses is by using IP Utility:With the procedure shown above, all the cameras will have unique IP addresses, starting from192.168.0.101. In case there are 20 cameras selected, the last one of the cameras would havethe IP 192.168.0.120.Later, by pressing the “Refresh” button of the IP Utility, you will be able to see the list ofcameras with their new IP addresses.Please note that it is also possible to change the IP addresses manually by using the Webbrowser. In such case, please plug in only one camera at a time, and change its IP address byusing the Web browser before plugging in the next one. This way, the Web browser will not beconfused about two devices having the same IP address at the same time. |
Related manuals for ACTi D51
manualsdatabase
Your AI-powered manual search engine