ACTi E31 Hardware Manual
Also see for E33: Hardware manualHardware manualUser manualSpecificationsUser manual
                                 | |
Contents
|
www.acti.comHardware Manual33AppendixHow to Make an Ethernet Cable1. Prepare the following tools: Ethernet cable without connectors RJ-45 Connector (x2) RJ45 Crimping Tool Scissors2. Cut about 1 inch into the plastic sheath from the end of the cable.3. Unwind the wires and arrange them according to the color sequence below.1) Stripe Orange2) Orange3) Stripe Green4) Blue5) Stripe Blue6) Green7) Stripe Brown8) Brown4. Pinch the wires between your fingers and straighten them out.5. Use the scissors to make a straight cut across the wires ½ inch from the cut end.6. With the RJ-45 connector tab facing down, push the wires into the connector all the way tothe end.7. Place the connector into the crimping tool, and cinch down to secure the RJ-45 connectorto the Ethernet cable.8. Repeat the same procedures to attach the other end.1 inch |
Related manuals for ACTi E33
manualsdatabase
Your AI-powered manual search engine