ACTi E31 User Manual
Also see for D51: Installation guideHardware manualHardware manual
              | |
www.acti.comE31 Hardware User’s Manual136. After logging in, you will see the video from camera. To go to the main menu, click the“Setup” button on the top left.If you are using a single camera, this is enough to access the device.If you are using multiple devices, you need to change the current device to anotherunused IP address, so that when the next device is connected to the network, no twodevices use the same IP. Please perform the following steps.7. Go to IP Settings -> Connection Type8. Change the IP mode to Static.9. Change the IP to 192.168.0.101 or any other unused IPs. Do NOT use the PC’s IPaddress or 192.168.0.100.). If this is not the first device you add to the network, pleasealso avoid other devices’ IPs. |
Related manuals for ACTi D51
manualsdatabase
Your AI-powered manual search engine