www.acti.comE31 Hardware User’s Manual1410. Click “Apply”11. Please go to System -> Save & Reboot, and click “Apply”. Internet Explorer will closeafter a few seconds. This is normal.12. Wait for 30 seconds, and open IE again to connect to the new IP. (In this example,192.168.0.101). For the second device or more you add into the network, please typethe correct IP.13. Adjust the default Video setting by going to Video -> VideoPlease refer the firmware manual for the detail information.

Precautions

Introduction

Features and Benefits

Safety Instructions

Physical description

Basic Connections

Product Specification

Accessing Camera

ACTi E31 User Manual

Installation Procedures

Step 2: Install the Gang Box Converter

Step 3: Unpack the Camera

Step 4: Attach the Mounting Plate

Step 5: Connect and Install the Camera

Step 6: Access the Camera Live View

Appendices

access the camera

How to Adjust Focus and Viewing Angle

Safety Information

List of Models

Package Contents

Physical Description

Configure the IP Addresses

Using the Default Camera IP Address

Access the Camera

Mounting Solutions

Other Mounting Accessories

Installing the Camera on a Surface

Step 2: Attach the Mounting Plate

Step 3: Connect the Cable

Step 4: Attach the Fixing Bracket

Step 5: Install the Camera

Step 6: Connect to Network

Step 8: Adjust the Viewing Angle and Focus

Other Adjustments and Accessories

How to Replace the Dome Cover