www.acti.comHardware Manual176. Insert the claw and rubber insert into the cable gland body and then attach the clampingnut to complete the cable solution.NOTE: Make sure the clamping nut is tightly attached to the cable gland body.

Precautions

Safety Instructions

Introduction

Physical Description

Installation Procedures

Installing the Camera on a Flat Surface

Step 2: Open the Camera Cover

Step 3: Prepare for Waterproof Installation

Step 6: Close the Cover

Waterproof Solutions

Waterproof Solution with Conduit

Other Connections

Connecting DI/DO Devices (Optional)

Connecting Audio In / Out Devices (Optional)

Configure the IP Addresses

Access the Camera

ACTi KCM-7911 Hardware Manual

Features and Benefits

Physical description

Product Specification

Installation Procedure

How to Do the Waterproof Installation

Accessing Camera

KCM-7911

Step 1: Prepare for Waterproof Installation

Step 2: Prepare the Camera for Installation

Step 3: Install the Gang Box

Step 4: Install the Gang Box Converter

Step 5: Connect the Cable(s)

Step 6: Install the Camera

Step 7: Connect to Network

Step 9: Close the Dome Cover

Appendices

How to Connect a Power Adapter (Optional)

How to Connect DI/DO Devices (Optional)

How to Connect Audio Devices (Optional)

Safety Information

Mounting Solutions

Installation Procedures using Naked Cable

Step 2: Attach the Tilted Mount

Step 4: Open the Camera Cover

Step 6: Install the Camera to the Tilted Mount

Step 7: Close the Cover

Installation Procedures using Flex Conduit

Step 4: Prepare for Waterproof Installation

installation guide

Step 5: Install the Camera to the Tilted Mount

safety information