ACTi KCM-7911 Hardware Manual

Also see for KCM-7911: Hardware user manual Installation guide Installation guide

Contents

www.acti.comHardware Manual26NOTE: For more information on DI/DO connections, please refer to the Knowledge Basearticle All about Digital Input and Digital Output downloadable from the link below(http://www.acti.com/kb/detail.asp?KB_ID=KB20091230001).Connecting Audio In / Out Devices (Optional)Depending on your surveillance needs, you may connect audio input or output device, such asan active microphone or speaker, to your camera. In this case, you need to connect the audioinput/output device to the supplied audio terminal block.To connect audio input / output devices, map the pins to one of the pin combinations below:Device Pin Mapping InstructionsAudio Output1 GND Connect the wires of the audio output device to GND(Pin 1) and AUDIO.OUT (Pin 2).2 DI1Audio Input3 GND Connect the wires of the audio input device to GND(Pin 3) and AUDIO.IN (Pin 4).4 DI2Press and hold the orange tab as you insert the wire through the pin slot, then release theorange tab to secure the wire.NOTE: For more information about AUDIO in connections, please refer to the KnowledgeBase article How to Use Audio-in of ACTi Cameras, downloadable from the link below(http://www.acti.com/support/KnowledgeBase/outside/detail.asp?KB_ID=KB20100114003).4321