ACTiSYS IrDA PC Adapter ACT-IR220L+/220L/200L User Manual

Also see for ACT-IR200L: User manual User manual User manual

Contents

ACTiSYS IrDA PC Adapter ACT-IR220L+/220L/200L User Manual Manual pdf 19 page image

The Wireless Connectivity Expert Serial-IR Dongle Installation ManualACTiSYS Confidential Information Version 1.5.1.19. WINDOWS ME INSTALLATION GUIDENote 1: If you have not verified your BIOS setup at this point, we strongly recommend you to referback to Chapter 4 BIOS SETUP VERIFICATION and verify your BIOS setup again.Note 2: Verify that the Com port you will use to install ACT-IR220L/220L+/200L has not been alreadyused or occupied by any other hardware or software. We recommend users to completelydelete any files or drivers that can interrupt clean fresh installation of our product.Note 3: You are trying to install an SIR product. Your operating system can always be upgraded touse FIR products. However you can never downgrade from an FIR product to an SIR product.Therefore, make sure that you have not previously installed any other FIR product on yoursystem.Note 4: You may experience problems if you are using a beta version of Windows ME or an oldupgraded edition of Windows ME. Some German version of Windows ME has also knownon lacking of virtual COM port. This problem may make our device incapable ofcommunicating with the other devices.Following are the instructions to properly install the ACT-IR220L+/220L/200L Dongle. You need acomputer system with Windows ME already installed and at least one serial port available. The bestchoice for the system is a desktop PC.A. Connect ACT-IR220L+/220L/200L serial adapter to the COM Port of Desktop PC.B. Boot up your computer system.C. Double Click My Computer icon on DeskTopD. Double click Control Panel icon.E. Double click Add New Hardware icon.F. On the following boxes, click Next>.© Copyright 2001-2008 ACTiSYS Corp. Page 19 of 37 Jul. 8, 2008