ACTiSYS IrDA PC Adapter ACT-IR220L+/220L/200L User Manual

Also see for ACT-IR200L: User manual User manual User manual

Contents

ACTiSYS IrDA PC Adapter ACT-IR220L+/220L/200L User Manual Manual pdf 6 page image

The Wireless Connectivity Expert Serial-IR Dongle Installation ManualACTiSYS Confidential Information Version 1.5.1.15. WINDOWS 98 INSTALLATION GUIDENote 1: If you have not verified your BIOS setup at this point, we strongly recommend you to referback to the Chapter 4 BIOS SETUP VERIFICATION and verify your BIOS setup again.Note 2: Verify that the COM port you will use to install ACT-IR220L/220L+/200L has not been alreadyused or occupied by any hardware or software. We recommend users to completely deleteany files or drivers that can interrupt clean fresh installation of our product.Note 3: You are trying to install an SIR product. Your operating system can always be upgraded touse FIR products. However you can never downgrade from an FIR product to an SIR product.Therefore make sure that you have not previously installed any other FIR products on yoursystem.Followings are the instructions to properly install the ACT-IR220L+/220L/200L Dongle. You need acomputer system with Windows 98 already installed and at least one serial port available. The bestchoice for the system is a desktop PC.A. Connect ACT-IR220L+/200L serial adapter to the COM Port of Desktop PC.B. Boot up your computer system.C. Double Click My Computer on DeskTop.D. Double Click Control Panel.E. Double Click Add New Hardware on Control Panel Window.F. Click Next>.© Copyright 2001-2008 ACTiSYS Corp. Page 6 of 37 Jul. 8, 2008