ADC ML-122 Installation Manual

Also see for ML-122: Service manual

ADC ML-122 Installation Manual Manual pdf 41 page image

37SECTION VWARRANTY INFORMATIONA. RETURNING WARRANTY CARDS1. Before any dryer leaves the ADC factory test area, a warranty card is placed on the back side of the maindoor glass. These warranty cards are intended to serve the customer where we record the individualinstallation date and warranty information to better serve you should you file a warranty claim.a. If a warranty card did not come with your dryer, contact the ADC Warranty Department or the ADCService Department at (508) 678-9000.IMPORTANT: A separate warranty card must be completed and returned for each individual dryer.NOTE: Be sure to include the installation date when returning the warranty card(s).B. WARRANTYFor a copy of the ADC commercial warranty covering your particular dryer(s), contact the ADC reseller fromwhom you purchased the equipment and request a dryer warranty form. If the reseller cannot be contacted oris unknown, warranty information can be obtained from the factory by contacting the ADC Warranty Departmentat (508) 678-9000.NOTE: Whenever contacting the ADC factory for warranty information, be sure to have the dryer’smodel number and serial number available so that your inquiry can be handled in anexpeditious manner.C. RETURNING WARRANTY PARTSALL dryer or parts warranty claims or inquires should be addressed to the ADC Warranty Parts Department.To expedite processing, the following procedures must be followed:1. No parts are to be returned to ADC without prior written authorization (“Return Material Authorization”[R.M.A.]) from the factory.NOTE: An R.M.A. is valid for only thirty (30) days from date of issue.a. The R.M.A. issued by the factory, as well as any other correspondence pertaining to the returnedpart(s), must be included inside the package with the failed merchandise.