ADJ 6-PACK SKB CASE User Instructions

ADJ Products, LLC - www.adj.com - Element HexIP Pearl User Manual Page 14Channel Value Function1 RED0 - 255 0% - 100%2 GREEN0 - 255 0% - 100%3 BLUE0 - 255 0% - 100%4 WHITE0 - 255 0% - 100%5 AMBER0 - 255 0% - 100%6 UV0 - 255 0% - 100%7 MASTER DIMMER0 - 255 0% - 100%8 STROBING0 - 31 LED OFF32 - 63 LED ON64 - 95 STROBING SLOW - FAST96 - 127 LED ON128 - 159 PULSE STROBING SLOW - FAST160 - 191 LED ON192 - 223 RANDOM STROBING SLOW - FAST224 - 255 LED ON9 PROGRAM SELECTION MODE0 - 51 DIMMING MODE52 - 102 COLOR MACRO MODE103 - 153 COLOR CHANGE MODE154 - 204 COLOR FADE MODE205 - 255 AUTO RUN MODEElement HexIP Pearl 11 Channel ModeADJ Products, LLC - www.adj.com - Element HexIP Pearl User Manual Page 25Element HexIP Pearl Operating InstructionsRGBWA & UV Dimmer Mode:1. Plug the fixture in and press the MODE button “r: XXX” is dis-played. You now are in Red dimming mode. Press the UP andDOWN buttons to adjust intensity. After you have finished adjust-ing the intensity, or if you would like to skip to the next color,press the SET UP button.2. When “G: XXX” is displayed you are in Green dimming mode.Press the UP and DOWN buttons to adjust intensity.3. When “b: XXX” is displayed you are in Blue dimming mode.Press the UP and DOWN buttons to adjust intensity.4. When “U: XXX” is displayed you are in White dimming mode.Press the UP and DOWN buttons to adjust intensity.5. When “A: XXX” (Amber) is displayed you are in Amber dimmingmode. Press the UP and DOWN buttons to adjust intensity.6. When “u: XXX” is displayed you are in UV dimming mode. Pressthe UP and DOWN buttons to adjust intensity.7. After you have adjusted the colors to make your desired coloryou can then activate strobing by pressing the SET UP button toenter the strobe mode.8. “FS: XX” will be displayed, this is strobe mode. The strobecan be adjusted between “00” (flash off) to “15” (fastest flash).Static Color Mode:1. Plug the fixture in and press the MODE button until “CLXX” is dis-played.2. There are 64 colors to choose from. Select your desired color bypressing the UP and DOWN buttons. After you have selected yourdesired color you can activate strobing by pressing the SET UPbutton to enter the Flash (strobe) mode.3. “FS.XX” will be displayed, this is Flash mode. The Flash can beadjusted between “FS.00” (flash off) to “FS.15” (fastest flash).