ADJ COB CannOn Wash DW User Instructions

Also see for COB CannOn Wash DW: User instructions

Contents

ADJ COB CannOn Wash DW User Instructions Manual pdf 11 page image

ADJ Products, LLC - www.adj.com COB Cannon Wash DW User Manual Page 11Master-Slave Connections and Settings:1. Daisy chain your units via the XLR connector on the rear of the unit. Use standard XLR data cables to linkyour units together. Remember that the Male XLR connector is the input and the Female XLR connector is theouput. The first unit in the chain (master) will use the female XLR connector only. The last unit in the chain willuse the male XLR connector only.2. Set the “Master” unit to your desired mode of operation.3. On the “Slave” units press the MODE button until “SLAu” is displayed. Each “Slave” unit must be set to thesame setting.4. Connect the first “Slave” unit to the “Master.” The “Slave” unit(s) should now start following the “Master” unit.CAD DRAWINGADJ RFC OPERATION