ADJ COB CannOn Wash DW User Instructions

Also see for COB CannOn Wash DW: User instructions

Contents

ADJ COB CannOn Wash DW User Instructions Manual pdf 5 page image

ADJ Products, LLC - www.adj.com COB Cannon Wash DW User Manual Page 5SAFETY PRECAUTIONS• To reduce the risk of electrical shock or fire, do not expose this unit rain or moisture• Do not spill water or other liquids into or on to your unit.• Do not attempt to operate this unit if the power cord has been frayed or broken. Do not attempt to remove orbreak off the ground prong from the electrical cord. This prong is used to reduce the risk of electrical shock andfire in case of an internal short.• Disconnect from main power before making any type of connection.• Do not remove the cover under any conditions. There are no user serviceable parts inside.• Never operate this unit when it’s cover is removed.• Never plug this unit in to a dimmer pack• Always be sure to mount this unit in an area that will allow proper ventilation. Allow about 6” (15cm) betweenthis device and a wall.• Do not attempt to operate this unit, if it becomes damaged.• This unit is intended for indoor use only, use of this product outdoors voids all warranties.• During long periods of non-use, disconnect the unit’s main power.• Always mount this unit in safe and stable matter.• Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placedupon or against them, paying particular attention to the point they exit from the unit.• Cleaning -The fixture should be cleaned only as recommended by the manufacturer. See page 15 for cleaningdetails.• Heat -The appliance should be situated away from heat sources such as radiators, heat registers, stoves, orother appliances (including amplifiers) that produce heat.• The fixture should be serviced by qualified service personnel when:A. The power-supply cord or the plug has been damaged.B. Objects have fallen, or liquid has been spilled into the appliance.C. The appliance has been exposed to rain or water.D. The appliance does not appear to operate normally or exhibits a marked change in performance.DMX SET UPThe ADJ COB Cannon Wash DW contains a automatic voltage switch, which will auto sense the voltage whenit is plugged into the power source. With this switch there is no need to worry about the correct power voltage,this unit can be plugged in anywhere.DMX-512: DMX is short for Digital Multiplex. This is a universal pro- tocol used as a form of communicationbetween intelligent fixtures and controllers. A DMX controller sends DMX data instructions from the controller tothe fixture. DMX data is sent as serial data that trav- els from fixture to fixture via the DATA “IN” and DATA“OUT” XLR ter- minals located on all DMX fixtures (most controllers only have a DATA “OUT” terminal).DMX Linking: DMX is a language allowing all makes and models of different manufactures to be linked togetherand operate from a single controller, as long as all fixtures and the controller are DMX compli- ant. To ensureproper DMX data transmission, when using several DMX fixtures try to use the shortest cable path possible. Theorder in which fixtures are connected in a DMX line does not influence the DMX addressing. For example; afixture assigned a DMX address of 1 may be placed anywhere in a DMX line, at the beginning, at the end, oranywhere in the middle. When a fixture is assigned a DMX address of 1, the DMX controller knows to sendDATA assigned to address 1 to that unit, no matter where it is located in the DMX chain.