ADJ Double Phase LED User Instructions

Contents

American DJ® - www.americandj.com - Double Phase LED Instruction Manual Page 13 American DJ® - www.americandj.com - Double Phase LED Instruction Manual Page 14Operating Modes: The Double Phase LED three operatingmodes.• Sound Active Mode -The unit will react to sound, chasing through the built-in programs.The sound sensitivity is adjustable.• Show Mode -Run 1 of 8 preset shows.• DMX control mode -This function will allow you to control each individual fixtures traitswith a standard DMX-512 controller such as the Elation® ShowDesigner.™Universal DMX Control: This function allows you to use aElation® universal DMX-512 controller to control the chases andpatterns, dimmer and strobe. A DMX controller allows you to createunique programs tailored to your individual needs.1. The Double Phase LED has two DMX Channel modes. A 1 chan-nel mode and a 6 channel mode. To set the channel mode seepage 9. See pages 16-17 for detailed description of the DMXtraits.2. To control your fixture in DMX mode, follow the set-up procedureson pages 5-7 as well as the set-up specifications that areincluded with your DMX controller.3. Use the controller’s faders to control the various DMX fixture traits.4. This will allow you to create your own programs.5. Follow the instruction on page 9 to set the DMX address.6. For longer cable runs (more than a 100 feet) use a terminator onthe last fixture.7. For help operating in DMX mode consult the manual includedwith your DMX controller.Sound Active Mode: This mode allows either single unit or severalunits linked together, to run to the beat of the music.1. Press the MENU button until “SOUN” is displayed, and pressENTER. Press the UP or DOWN buttons so that “ON” is displayedand press ENTER. The unit is now sound active.See page 10 for sound sensitivity adjustment.2. The optional UC3 Controller (not included) may be used to con-trol different functions including blackout.Double Phase LED Operation Double Phase LED OperationShow Mode: In this mode you can choose 1 of 8 shows to run.1. Tap the MENU button until “SHND” is displayed, and pressENTER.2. Tap the UP or DOWN buttons until you find your desired show,and press ENTER then press and hold MENU for 3 seconds tocon firm. See page 9 for more info.3. The optional UC3 Controller (not included) may be used to con-trol different functions including blackout.Master-Slave Operation: This function will allow you to link up to 16units together and operate without a controller. The units will be soundactivated. In Master-Slave operation one unit will act as the controllingunit and the others will react to the controlling units programs. Any unitcan act as a Master or as a Slave.1. Using approved DMX data cables, daisy chain your units togeth-er via the XLR connector on the rear of the units. Remember theMale XLR connector is the input and the Female XLR connectoris the output. The first unit in the chain (master) will use the femaleXLR connector only - The last unit in the chain will use the maleXLR connector only. For longer cable runs we suggest a termina-tor at the last fixture.2. On the Master unit find your desired show and set that show bypressiing the ENTER button.3. On the slave units tap the MENU button until “SLND” is displayed,and Press ENTER. Choose either “SL 1” or “SL 2” and pressENTER. See page 9 for more info.4. The slave units will now follow the Master unit.5. The optional UC3 Controller (not included) may be used to con-trol different functions including blackout.

/ 10

Related manuals for ADJ Double Phase LED